油加热器 laser molding machine temperature control

特点：泵浦3.75KW-15KW. 发热功率36KW/90KW,多组冷却管。

加热快，冷却快，流量大。并用1000度的耐温材料保温，可以有效预防火灾。

型      号 ： OTP系列(采用大流量泵浦） 
Model: OTP series(mass flow pump)

类      型  ：  油循环（油加热器）
Type: oil circulation(oil heater) 

●   最高使用温度300℃  Highest temperature reaching 300℃
●   按键式操作面板，操作简单 The panel control adopted micro, easy operation
●   采用连轴式热媒油泵浦，泵浦流量大，使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life
●   可指定选用德国KSB、德国SPECK、德国ALLWEILER热媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
●   采用TAT法兰式球阀及法兰式过滤 器  TAT flanged ball valves and flange type filter
●   “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand
●   自动排气和带手动模具回油功能 Full automatic exhaust function and manual mode die oil return function
●   出油温度显示 temp. indication of oil output and return
●   多段加热控制，功率可自行调整 multi-zone heating control with power self-adjusting function
●   电气配电箱采用双重隔离及散热设计 Double-insulation/heating dissipation design for the electric distributioin cabinet
●   减少废品率、减少加热时间、增加模具/模板寿命  Increase the service life of mold/ templet and reduce the waste rate and the heating time
●   特殊管路系统设计，传热油不氧化，寿命长Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle. 
●   采用高温保温材料隔热处理，节约能源及热量损失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.
●   故障指示，维修不用专业人员Fault indication function which allows maintenance without professional maintainers.