印花设备专用油加热器
  • 详情
印花设备专用油加热器
1、 循环泵:5.5HP油泵。
2、加热功率:36KW(18+18KW)
3、   热油出入口:DN40法兰式截止阀1.5"内螺纹
4、  冷却水:3/4"球阀

>>机型特点   Main feature
    ●   最高使用温度300℃  Highest temperature reaching 300℃
    ●   按键式操作面板,操作简单 The panel control adopted micro, easy operation
 ●   采用连轴式热媒油泵浦,泵浦流量大,使用寿命长 usehot oil pump of axis-connection type with big flow rate and long service life
 ●   可指定选用德国KSB、德国SPECK、德国ALLWEILER热媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
 ●   采用TAT法兰式球阀及法兰式过滤 器  TAT flanged ball valves and flange type filter
    ●   “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand
    ●   自动排气和带手动模具回油功能 Full automatic exhaust function and manual mode die oil return function
    ●   出油温度显示 temp. indication of oil output and return
    ●   多段加热控制,功率可自行调整 multi-zone heating control with power self-adjusting function
    ●   电气配电箱采用双重隔离及散热设计 Double-insulation/heating dissipation design for the electric distributioin cabinet
    ●   减少废品率、减少加热时间、增加模具/模板寿命  Increase the service life of mold/ templet and reduce the waste rate and the heating time
    ●   特殊管路系统设计,传热油不氧化,寿命长Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle. 
    ●   采用高温保温材料隔热处理,节约能源及热量损失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.
    ●   故障指示,维修不用专业人员Fault indication function which allows maintenance without professional maintainers.

>>安全保护系统
    ●   总电源过电流无熔丝断路器 Circuit breaker    
 ●   异常警告指示灯系统 Alarm system
    ●   马达反转保护及指示灯 motor rollback protective lamp   
  ●   异常警告蜂鸣器 Alarm sounding
    ●   缺油保护及指示灯Oil lack protective lamp                   
 ●   保温隔热处理 Insulation heating system
    ●   过热保护及指示灯 over-heat protective   
 ●   回油温度显示表Oil reture display
    ●   循环泵浦过载保护及指示灯Circuiting pump overload protective lamp
 ●   电源欠相保护 Power protection
 ●   By-Pass油压回路 By-pass hydrauic circuit
   ●接触器卡死报警提示,超高温断电功能,有效预防着火.


>>产品参数Specification

1566025387777075279.jpg


上一页 下一页
商品信息
电商缩略图展示

0

库存:10

已选0